Table of Contents
Table of Contents
Equipment Manager provides access to machine and implement profile settings for features, such as AutoTrac and Section Control.
Refer to Machine Profile and Implement Profile for additional information.
NOTE: Machines, implements, and control units are shown in Equipment Manager when they are detected by the display. If a machine is not detected by the display, select a machine type to create a machine profile.
Equipment Manager provides access to machine profile settings for features, such as AutoTrac.
Refer to Machine Profile for additional information.
|
Combine - Select to view or edit combine settings. |
|
|
Header Settings - Select to view or edit header settings. |
Header Settings |
|
Tractor - Select to view or edit tractor settings. |
|
|
Add Implement - Select to add an implement without a control unit. |
|
|
Add Operation - Select to add a virtual operation in addition to the operation created for the detected control unit. |
|
Operations default to the implement dimensions of the detected implement and cannot be changed.
|
Air Seeder (SeedStar 2) - Select to view or edit implement settings. |
|
|
Add Operation - Select to add a virtual operation in addition to the operation created for the detected implement. |
|
NOTE: Only use a virtual operation to document an operation that is not controlled by a control unit.
Operations default to the implement dimensions of the detected implement and cannot be changed.
|
Air Seeder (SeedStar 4) - Select to view or edit implement settings. |
|
|
Add Operation - Select to add a virtual operation in addition to the operation created for the detected implement. |
|
NOTE: Only use a virtual operation to document an operation that is not controlled by a control unit.
Operations default to the implement dimensions of the detected implement and cannot be changed.
|
Baler - Select to view or edit implement settings. |
|
|
Manure Constituent Sensing/Slurry Applicator - Select to view or edit implement settings. |
|
|
Planter (SeedStar 2 and 3) - Select to view or edit implement settings. |
|
|
Planter with GreenStar Rate Controller - Select to view or edit implement settings. |
|
|
Add Operation - Select to add a virtual operation in addition to the operation created for the detected implement. |
|
NOTE: Only use a virtual operation to document an operation that is not controlled by a control unit.
Operations default to the implement dimensions of the detected implement and cannot be changed.
|
Planter (SeedStar 4) - Select to view or edit implement settings. |
|
|
Add Operation - Select to add a virtual operation in addition to the operation created for the detected implement. |
|
NOTE: Only use a virtual operation to document an operation that is not controlled by a control unit.
Operations default to the implement dimensions of the detected implement and cannot be changed.
|
Tillage - Select to view or edit implement settings. |
|
|
Add Operation - Select to add a virtual operation in addition to the operation created for the detected implement. |
|
NOTE: Only use a virtual operation to document an operation that is not controlled by a control unit.
Operations default to the implement dimensions of the detected implement and cannot be changed.
|
ISOBUS Implement - Select to view or edit implement settings. |
|
|
ISOBUS Implement (Section Control Unsupported) - Select to view or edit implement settings. |
|
|
Rate Controller - Select to view or edit implement settings. |
|
|
Rate Controller Dry - Select to view or edit implement settings. |
|
|
Rate Controller 2000 - Select to view or edit implement settings. |
|
|
Dry Spreader - Select to view or edit spreader settings. |
|
|
Sprayer - Select to view or edit sprayer settings. |
|
|
Forage Harvester - Select to view or edit forage harvester settings. |
|
|
Cotton Harvester - Select to view or edit cotton harvester settings. |
|
|
Windrower - Select to view or edit windrower settings. |
|
|
Sugar Cane Harvester - Select to view or edit sugar cane harvester settings. |
|
|
Wirtgen Soil Stabilizer - Select to view or edit settings. |
|
