Quick Links
Quick Links
SeedStar allows you set various basic parameters that affect multiple components on the implement.
NOTE: Some items below are only displayed if machine is equipped with the associated option.
Settings Tab |
Settings |
Population Setup— allows you to enable the basic or advanced target population feature used for seed delivery.
Fast Start— allows you to choose automated seed delivery options.
Speed— allows you to select the active speed source.
Seed Motor— allows you to set the frame height that starts and stops the seed motors.
Gauge Wheels— allows you to configure the downforce increments for the adjustment buttons used on the run screens and the Overview application pages. The pause timer interval is also entered here.
Vacuum Automation— allows you to assign the tractor hydraulic controls to the vacuum blowers. You can also configure the intervals for the adjustment buttons used on the run screens and the Overview application pages.
Selective Control Valve (SCV) Assignments— allows you to select SCV operation mode, assign functions to an SCV, and access other SCV control options.
Row Cleaners— allows you to enable the system, reset the defaults, set incremental adjustments, or enable the upforce adjustment.
Closing Wheels— allows you to turn groups ON or OFF and set up leak detection.
Coulter Disk— allows you to turn groups ON or OFF and set up low-pressure detection.
Central Commodity System (CCS)— allows you to enable and disable the seed agitators and CCS blower. You can also override the automatic CCS shutoff.
Alarm Notification— allows you to enable or disable the alarm that indicates rows are commanded OFF by Section Control.
Auto Brush Reversal— enables a feature to reverse the BrushBelt at a specified time interval to clean out brush debris.
Help Tab |
Help |
Help allows you to navigate and view all the Help pages from this one location.
About Tab |
About |
About tab allows you to view implement Software and Hardware Identification information, including Copyright Information, License Agreement, and Lifetime Hours Worked.
Hardware— allows you to view Implement Frame, SeedStar Controller, Row Cleaner Controller, and Electric Power Generation (EPG) Controller.
