Quick Links
Quick Links
Fast Start allows you to engage the meter drives for 6 seconds if the electric power generation (EPG) and the frame height requirements are met. The meter drives engage when the implement is stationary. Normal operation resumes when your ground speed meets the System Requirement.
NOTE: Messages appear on-screen when the feature is activated.
NOTE: Fast Start is disabled when the seed meters are engaged.
Manual Control— uncheck this selection and enable manual control of Fast Start. Engage Fast Start with the shortcut key.
Auto-Enable Fast Start on Implement Down
|
NOTE: Shortcut keys for this application can be added to the shortcut bar using Layout Manager. |
Fast Start Shortcut Key |
Automatic Control— select to have Fast Start engage whenever the implement is lowered.
NOTE: When this option is selected, Quick Start is no longer available.
Auto-Enable Fast Start on Implement Down
Override Section Control During Fast Start— allows you to select whether to have all the rows activate when Fast Start key is selected or only the rows commanded by Section Control.
Uncheck this selection and allow Section Control to operate while Fast Start is engaged.
Override Section Control During Fast Start
Select to override Section Control when Fast Start is engaged.
Override Section Control During Fast Start
