Quick Links

Information and Settings | Gauge Wheels

Gauge Wheels allows you to configure the downforce increments for the adjustment buttons used on the run screens and the Overview application pages. The pause timer interval is also entered on this page.

Increment Adjust— is the amount that you want the force to change each time the plus or minus button is selected on the Gauge Wheel Downforce page or the run page module.

Procedure to Modify:

  1. Select the input box and enter the increment amount.

Input Box

  1. Select to Save the value or Cancel to close without saving.

OK

Cancel

Maximum: 222 N (50 lb)

Default: 89 N (20 lb)

Minimum: 4.5 N (1 lb)

Active Downforce (DF) Pause Timer— is the amount of time that the active downforce system refrains from making automatic adjustments when the Pause button is selected.

NOTE: The downforce pause timer is only available when active downforce is enabled.

Procedure to Modify:

  1. Select the input box and enter the number of seconds to pause the downforce system when the Pause button is selected.

Input Box

  1. Select to Save the value or Cancel to close without saving.

OK

Cancel

Maximum: 30 seconds

Default: 15 seconds

Minimum: 5 seconds