Quick Links

Information and Settings | Vacuum Automation

Vacuum Automation allows you to assign the tractor hydraulic controls to the vacuum blowers. You can also configure the increments for the adjustment buttons used on the run screens and the Overview application pages.

Target— is the amount that you want the target vacuum level to change each time the plus or minus button is selected on the Vacuum page or the run page module.

Procedure to Modify:

  1. Select the input box and enter the increment amount.

Input Box

  1. Select to Save the value or Cancel to close without saving.

OK

Cancel

SCV Assignments— displays the current implement functions and the SCV assigned to each function. Select Edit Settings to adjust the assignments if they do not match your hydraulic connections.

Edit Settings

Maximum: 6 mm (0.25 in) of H2O

Default: 13 mm (0.5 in) of H2O

Minimum: 13 mm (0.5 in) of H2O