Quick Links

Information and Settings | Row Cleaners

Row Cleaners allows you to enable the system, reset the defaults, set incremental adjustments, or enable the upforce adjustment. Select ON to enable the Easy Adjust Row Cleaners or select OFF to disable.

ON/OFF

Presets— are the factory defaults. Select to reset the row cleaners to factory defaults. Follow the on-screen messages.

Reset to Default

Adjustment Step Size— is the amount that you want the position of the row cleaner to change each time the up or down arrows are selected on the Row Cleaner Position page or the run page module.

Procedure to Modify:

  1. Select the input box and enter the increment amount.

Input Box

  1. Select to Save the value or Cancel to close without saving.

OK

Cancel

Maximum: 200 kPa (2 bar) (29 psi)

Default: 21 kPa (0.21 bar) (3 psi)

Minimum: 7 kPa (0.07 bar) (1 psi)

Enable Up Pressure Adjustments— allows adjustment to the row cleaner flotation. Select to make the Up Pressure appear on the adjustment screen area and the feature tile.

Enable Up Pressure Adjustment