Using SF2 or SF3 at marginal accuracy may result in skips or overlap due to GPS drift.
Diagnostics page is used to determine if the requirements to operate Section Control have been met.
Display with a Section Control activation or license
StarFire Receiver with valid GPS signal
Control unit detected
Machine Profile and Implement Profile settings configured
Section Control master switch on
Section Control requires a compatible control unit. For a list of compatible control units, see Section Control main page.
Section Control functions with the following GPS signals:
RTK
M-RTK
SF-RTK
SF3
SF2
SF1
WAAS / EGNOS
The GPS Accuracy Indicator is used to determine the quality of GPS signal. The signal type and accuracy are important factors in Section Control performance.
|
Using SF2 or SF3 at marginal accuracy may result in skips or overlap due to GPS drift. |
|
|
Using SF1, WAAS, or EGNOS, even at full accuracy, may result in skips or overlap due to GPS drift. |
|
|
Section Control Status - Select to view the operation status of each section. |
|
