Table of Contents

Getting Started Using AutoTrac

AutoTrac Application - Navigate to AutoTrac application for guidance settings.

Help Center - Help is provided as a supplement to the paper Operator's Manual. Use Help Center to browse all help pages that are currently installed on the display.

AutoTrac Diagnostics - AutoTrac status pie icon has four stages representing different requirements.

AutoTrac ON / OFF toggle - Use the toggle to turn AutoTrac ON or OFF.

Resume button - Use Resume button to move AutoTrac from the enabled stage to the engaged stage. AutoTrac will take over steering of the machine.

Creating Tracks - There are several guidance track creation methods. Select the method that meets application needs:

• Straight - Uses straight-line parallel passes.

• Adaptive Curve - Uses a manually driven initial pass, then guides off of the previous pass.

• AB Curve - Uses a manually driven curved path with two end points (beginning and end) to generate parallel passes.

• Quick Line - Use shortcut key to create an A + Auto B guidance line.

Shift Track - Shift track adjusts position of the current guidance line left of, right of, or centered on current location. Shift track can be used to compensate for GPS drift inherent to any satellite-based, differentially corrected GPS system.

Track Spacing - Track spacing is used in guidance application to determine distance between each pass. Track spacing is similar to working width, but track spacing is only used for guidance. Both values are independent of each other.

Guidance Master ON / OFF toggle - Use the toggle to turn guidance ON or OFF.

Steering Optimization - Steering optimization allows finer adjustment of the AutoTrac system.