Table of Contents

Quick Line

Use Quick Line to create a guidance track on the run page with minimal button presses. The track is named automatically with no setup information.

To save the Quick Line, open guidance track list, select edit button, and rename the track.

Use Layout Manager application to add Quick Line or A+B shortcut key to the shortcut bar.

Create Quick Line-Auto B

Select Quick Line shortcut key to create a guidance track using Auto B method.

Quick Line

Use shortcut key again to overwrite existing Quick Line.

  1. Drive to desired location in field.

  2. Select Quick Line shortcut key.

  3. Drive Machine in desired direction across field.

NOTE: A distance of 15 m (49.2 ft) or longer must be driven before point B can be defined. Auto B method calculates point B from last five data points taken from 15 m (49.2 ft) driven, and runs a best fit line through points to determine a heading.

  1. The B—point will automatically be saved after traveling 15 m (49.2 ft).

Create Quick Line-A+B

Select A+B shortcut key to create a guidance track using A+B method.

A + B

1. Drive to desired location in field.

2. Select A+B shortcut key.

3. Select Set A Point button.

Set A Point

NOTE: After driving 3 m (10 ft), Set A Point button is disabled and Set B Point button becomes available. To reset the A point, Set A Point button must be selected again within the 3 m (10 ft).

4. Drive machine to desired point B.

5. Select Set B Point button.

Set B Point