Table of Contents
Table of Contents
Use Work Setup when changing implements, changing fields, or applying a different product. Settings available in Work Setup change based on the operation.
Use Layout Manager application to add Work Setup shortcut key to the shortcut bar.
|
Advanced Settings - Access Information and Settings to enable ISOBUS documentation mode. |
|
When using ISOBUS tasks, some Work Setup options change. See ISOBUS Work Setup for information.
|
Use Location to set client, farm, and field name. Selection is saved in Fields application. |
|
NOTE: Select a field name to recall a previous work data map for that field.
|
Use Equipment to set up Machine Profile and Implement Profile. |
|
|
If connected, configure GreenStar Rate Controller in ISOBUS VT before setting up implement profile. |
|
|
Boom & Nozzle Settings - Select to view and edit boom section settings, such as nozzle count and nozzle spacing. |
|
|
Settings Manager - Save, edit, or load machine and implement settings. |
|
NOTE: Settings Manager is not available on combines.
|
Operator - Displays operator's name and applicator's license. Select to add or edit an operator. |
|
|
Conditions - Select to view or edit weather and field conditions. |
|
|
Season - Select to change crop year that data is recorded for. |
|
NOTE: Operator and conditions are enabled in Information and Settings.
Use Work Summary to select operation details, such as variety, product, and target rate / prescription.
|
New Work - Select to clear work data from the map for the selected field. |
|
NOTE: When New Work is selected, previous work is saved and can be accessed using Work List.
Other conditions that start new work:
The operator changes client, farm, or field and does not resume work.
The operator changes the crop while planting or harvesting. If more than one operation is present, new work is started for the operation that was modified.
The operator changes the product when applying a dry or gas operation. If more than one operation is present, new work is started for the operation that was modified.
The operator changes the product or tank mix when more than one liquid operation is actively being applied. New work is started for the operation that was modified.
NOTE: Changing the product or tank mix while applying a single liquid operation does not automatically generate new work. The New Work button must be selected if new work is desired.
A new implement or platform is detected that creates a set of operations that do not match the previous set of operations.
A previously detected implement or platform is disconnected and a virtual implement or platform is created.
The operator joins a sharing work group and any of the other listed conditions occur.
|
Work List - Select to view shared work groups, join a work group, or view work history. |
|
|
Harvest Setup - Select to view or edit combine settings. |
Harvest Setup |
NOTE: Access Dry Application System to chain bins containing the same product.
AutoPath Recording displays the recording status of AutoPath data.
