Lateral Offset
Measures lateral distance from the center point of the machine to center point of the working width of the header. This value should be set to 0.0 unless header is offset from the center line of the machine. To input a measurement other than 0.0, Left or Right must be selected.
The following applications require Lateral Offset settings:
-
Guidance
-
Coverage Map
Instructions for Measuring Lateral Offset
Work Point
Measure distance from the connection point to the point where the crop is cut.
NOTE: With some machines and headers, work point is automatically set by the machine control units.
The following application requires Work Point setting:
-
Work Data Maps
Instructions for Measuring Work Point
Connection Offset
Measure the in-line distance from the non-steering axle to feeder house face plate.
NOTE: With some machines and headers, connection offset is automatically set by the machine control units.
Instructions for Measuring Connection Offset
Work Point
Connection Offset
Connection Offset