Table of Contents

Machine Profile Yield Documentation, Specialty Crop

Machine Profile settings are important for accurate performance of John Deere AMS applications, such as AutoTrac and Section Control.

Enter the following information:

Profile Name

Enter the name of the machine profile.

Controller

Select Yield Documentation, Specialty Crop to set up a yield documentation control unit. Operations from the control unit are automatically set up in the virtual implement.

GPS Offsets

GPS Lateral Offset

Measure the lateral distance (left or right) from the center line of the machine to center of GPS receiver. This value should be set to 0.0 unless GPS receiver is offset left or right of the center line of machine. To input a measurement other than 0.0, Left or Right must be selected.

The following applications require GPS Lateral Offset settings:

• Guidance

• Coverage Map

Instructions for measuring GPS Lateral Offset

GPS In-line Offset

Measures in-line distance from the center of rotation to the center of GPS receiver.

The following applications require GPS In-line Offset settings:

• Documentation

• Section Control

• Guidance

Instructions for measuring GPS In-line Offset