Table of Contents
Table of Contents
Advanced TCM calibration generates a temporary guidance line for the operator to drive with AutoTrac engaged while the receiver TCM calibrates. Advanced TCM calibration is more accurate than the previous calibration process. It does not require the machine or implement to be located on level ground, and multiple receivers can be calibrated at once.
StarFire 6000 Receiver or newer
Software version 4.40N (software bundle 20-2) or newer
AutoTrac activation or license
The machine receiver and any implement receiver that is connected to the machine is listed.
If a receiver meets the requirements for advanced TCM calibration, its status is Ready to Calibrate.
If a receiver does not meet the requirements for advanced TCM calibration, its status is Will not be Calibrated, and the reason why is given:
Incompatible Model - The receiver model is not compatible with advanced TCM calibration.
Incompatible Software - The receiver software must be updated to use advanced TCM calibration.
Insufficient Accuracy - The receiver accuracy level must be at least 80% to use advanced TCM calibration.
|
Select the Begin Calibration button to begin the advanced TCM calibration process. Follow the directions displayed on the screen. |
Begin Calibration Button |
NOTE: The advanced TCM calibration process generates a temporary guidance line for the operator to drive with AutoTrac engaged when calibrating the TCM. This line is not saved after the calibration is complete.
NOTE: The AutoTrac Status pie chart for the calibration has the same functionality as the regular AutoTrac Status pie.
