Note: If display detects machine, some values are automatically populated.Note: If display detects machine, some values are automatically populated.
Connection offset measures the in-line distance from a fixed point on the machine to the connection point. The connection point is the location where the implement connects to the machine. The location of the fixed point depends on the machine type and display type. Refer to Instructions for Measuring Connection Offset for more details.
Connection type, or hitch, describes how implement is attached to machine and controls how display determines implement movement behind machine.
Connection offsets only need to be entered for connection types that are used.
NOTE: Connection offset measurement for articulated tractors is different from GreenStar 3 2630 Display measurement.
NOTE: Rear 2-Point connection type offset from GreenStar 3 2630 Display is replaced by Rear 3-Point offset and a pivot offset in Implement Profiles.
The following applications require connection offset settings:
Coverage Map
Documentation
Section Control