Table of Contents

Machine Profile Utility Vehicle

Machine Profile settings are important for accurate performance of John Deere AMS applications.

Items accessible on the Machine Profile page:

Lateral Offset

Lateral offset is the lateral distance from center point of the machine to center point of the GPS receiver.

The following applications require Lateral Offset setting:

• Guidance

• Coverage Map

Instructions for Measuring GPS Lateral Offset

In-line Offset

In-line offset is the in-line distance from fixed axle to the GPS receiver.

The following applications require In-line Offset setting:

• Documentation

• Section Control

• Guidance

Height Offset

Height offset measures the vertical distance from the GPS receiver to the ground. Measure from the top of green portion of GPS receiver to ground.

Instructions for measuring GPS Height

Connection Offsets

Connection offset measures in-line distance from center of rear axle to connection point. Connection point is location where implement connects to machine.

Connection type, or hitch, describes how implement is attached to machine and controls how display determines implement movement behind the machine.

Connection offsets only need to be entered for connection types that are used.

The following applications require connection offset settings:

• Coverage Map

• Documentation

• Section Control

Instructions for Measuring Connection Offset