Working Width is the width of the area tilled, planted, sprayed, or harvested on each pass through the field. It is used to create coverage maps and calculate area worked.Working Width is the width of the area tilled, planted, sprayed, or harvested on each pass through the field. It is used to create coverage maps and calculate area worked.
The following applications require Working Width setting:
Mapping
Work Setup
Guidance
There are two methods to determine Working Width. Either enter total Working Width or enter Number of Rows and Row Width value. If Number of Rows and Row Width are entered, the system automatically calculates Working Width.
Toggle between Feet/Meters and Rows to display either option.
NOTE: Only Feet/Meters is shown when implement is auto-detected. Width is set by implement controller and can be changed in ISOBUS VT application.
Feet/Meters
|
|
Enter total working width. |
Instructions for Measuring Working Width
Rows
|
|
Enter number of rows in a single pass through field. |
Instructions for Determining Number of Rows
|
|
Enter row width as distance between each row. This is also known as row spacing. |
