Table of Contents

Create Driven Interior Boundary

Record a new interior boundary by driving the boundary.

Select the New Boundary input box to enter a name for the new boundary.

Select Passable checkbox to make it a passable interior boundary.

GPS Offset Point

Select GPS to use the machine receiver as the offset point.

To draw the boundary on either side of the machine receiver, set the offset location and the boundary offset.

Select the Offset Location toggle to set the offset either right or left of the machine.

NOTE: When the offset is set to 0.0 feet, Offset Location toggle is disabled.

Select the Boundary Offset input box to enter the offset distance.

Implement / Work Point Offset Point

Select Implement / Work Point to use the implement work point as the offset point.

NOTE: Implement / Work Point is selected by default when an implement is present in Equipment Manager.

To draw the boundary on either side of the implement, set the offset location and the boundary offset.

Select the Offset Location toggle to set the offset either right or left of the implement.

Select the Boundary Offset input box to enter the offset distance.

NOTE: Implement/Work Point default offset is equal to half of the implement working width in the Implement Profile.

Record Boundary

Select the Start Recording button to begin recording the boundary.

Start Recording

Drive the machine along the boundary.

Select the Pause button to pause recording.

Pause

NOTE: Pause recording to maneuver the machine without recording boundaries. A straight line is drawn between where recording was paused and where it was resumed.

Select the Cancel button to discard boundaries.

Cancel

Select the Save button to keep boundaries.

Save