Table of Contents
Table of Contents
The Information and Settings page allows you to access further adjustments and less common settings.
NOTE: Options available on Information and Settings differ based on the activations or licenses on the display and the type of machine the display is in.
|
Guidance Master - Toggle guidance ON and OFF. |
ON / OFF |
|
Implement Guidance - Toggle implement guidance ON and OFF (G5, 4600, and 4640 only). |
ON / OFF |
NOTE: Implement Guidance is only available when using integrated AutoTrac.
|
RowSense Master - Toggle AutoTrac RowSense ON and OFF. |
ON / OFF |
NOTE: See RowSense Settings for more information about using RowSense.
|
Turning Indicators - Toggle turn predictor ON and OFF. |
ON / OFF |
|
Tracking Tones - Toggle tracking tones ON and OFF. |
ON / OFF |
|
Working Width Change Notifications - Toggle working width change notifications ON and OFF. |
ON / OFF |
|
Tram Lines - Toggle tram lines ON and OFF. |
ON / OFF |
NOTE: Tram lines are only compatible with straight tracks and AB curve tracks.
|
Default Tram Spacing - Enter the default number of tracks (A) for the system to create between tram lines. |
|
|
The minimum value is 0 passes and the maximum value is 50. |
|
NOTE: Default tram spacing is set to three by default. Modifying the default tram spacing does not change previously created tram lines.
|
Shift Track Settings - Change shift track settings. |
ON / OFF |
|
Guidance Track Selection - Toggle automatic guidance track selection ON and OFF. |
ON / OFF |
NOTE: Guidance Track Selection toggle is always ON when the guidance line type is Coverage Track.
|
Shared Signal - Toggle Shared Signal ON and OFF. |
ON / OFF |
|
Lightbar Settings - Change lightbar settings. |
|
|
Curve Track Settings - Change curve track settings. |
ON / OFF |
|
Circle Track Settings - Change circle track settings. |
ON / OFF |
|
AutoTrac Steering Optimization - Adjust AutoTrac settings to fine-tune operation. |
|
NOTE: On 400 and 600 series sprayers with wet systems, ensure that tire size is defined after selecting the optimization button. AutoTrac performance is affected by using either row crop or float tires.
