RowSense Master - Select toggle to turn RowSense application on or off.
ON / OFF
|
RowSense Master - Select toggle to turn RowSense application on or off. |
ON / OFF |
When RowSense Master is off, RowSense features and settings are disabled. RowSense Master is only available if a RowSense sensor or a Vision sensor is connected to the machine.
|
RowSense Controls - Select button to view RowSense Status. |
|
RowSense Status window displays sensor offsets, sensor calibration, and system status information.
|
Select Row Entry mode.
|
|
Depending on the mode selected, the following procedures are used when entering a row:
GPS Steer:
Drive machine into row.
Press the resume button once to engage guidance.
Press the resume button a second time to engage row sensors.
Manual Steer:
Drive machine into row.
Press the resume button to engage guidance and row sensors.
Depending on the hardware installed on the machine, there are two methods to select the sensor configuration.
|
If Row Guidance Mode is displayed, select the sensor configuration installed on the machine. |
|
Vision + RowSense
Vision
RowSense
|
If Sensor Priority is displayed, use the selection boxes to choose the primary and secondary sensors installed on the machine. |
|
RowSense
Vision
No Sensor
RowSense Mode is displayed instead of Row Entry Mode on some machines.
|
Select RowSense mode.
|
|
Select manual RowSense mode to use the row sensor on the header only. Manual RowSense may require an AutoTrac RowSense license. Refer to sales manual for more information.
Manual RowSense mode is available if the following conditions are met:
A G5 Display, 4600 CommandCenter, or 4640 Universal Display is installed on the machine.
The display detects the machine as a self-propelled forage harvester, cotton picker, or cotton stripper.
The display detects the row sensors on the CAN bus.
