A + B Method
To create a Straight Track, use the following methods:
Machine Access A + Heading Method
Machine Access Lat/Lon + Heading Method
A + B Method |
|
Drive to desired location in field.
Select Set A button.
Drive machine to desired point B.
NOTE: Drive further than 3 m (10 ft) to set point B.
Select Set B button.
Select Done button.
A + Heading Method |
|
Drive to desired location in field.
Select Set A button.
Enter desired heading.
NOTE: 0.000 indicates North, 90.000 East, 180.000 South, and 270.000 West.
Select Done.
Auto B Method |
|
Drive to desired location in field.
Select Set A button.
Drive machine in desired direction across field.
NOTE: A distance of 15 m (49.2 ft) or longer must be driven before point B can be defined. Auto B method calculates point B from last five data points taken from the distance driven, and creates a best fit line through those points to determine a heading.
Point B is automatically saved after traveling 15 m (49.2 ft).
Select Done button.
Lat/Lon Method |
|
Enter latitude and longitude for point A.
Enter latitude and longitude for point B.
Select Done button.
NOTE: Enter latitude and longitude coordinates in decimal degrees.
Lat/Lon + Heading Method |
|
Enter latitude coordinate for point A.
Enter longitude coordinate for point A.
NOTE: Enter latitude and longitude coordinates in decimal degrees.
Enter desired heading.
NOTE: 0.000 indicates North, 90.000 East, 180.000 South, and 270.000 West.
Select Done button.
Machine Access A + B Method |
|
NOTE: Machine access method requires a Machine Access Pattern.
Drive to desired location in field.
Select Set A button.
Drive machine to desired point B.
Select Set B button.
Select Done button.
Machine Access A + Heading Method |
|
NOTE: Machine access method requires a Machine Access Pattern.
Drive to desired location in field.
Select Set A button.
Enter desired heading.
NOTE: 0.000 indicates North, 90.000 East, 180.000 South, and 270.000 West.
Select Done.
Machine Access Lat/Lon + Heading Method |
|
NOTE: Machine access method requires a Machine Access Pattern.
Enter latitude coordinate for point A.
Enter longitude coordinate for point A.
NOTE: Enter latitude and longitude coordinates in decimal degrees.
Enter desired heading.
NOTE: 0.000 indicates North, 90.000 East, 180.000 South, and 270.000 West.
Select Done button.
