SeedStar | Overview | Row Cleaners Status

• Raised— indicates that the row cleaners are retracted to the full height and are not in operation.

Gray

• Preset 1— indicates that the row cleaners are operating at Preset 1.

Green

• Preset 2— indicates that the row cleaners are operating at Preset 2.

Green

• Preset 3— indicates that the row cleaners are operating at Preset 3.

Green

• Low Pressure— indicates that the pressure applied to the row cleaner is below (near) the preset.

Amber

• High Pressure— indicates that the pressure applied to the row cleaner is above (near) the preset.

Amber

• Low Pressure— indicates that the pressure applied to the row cleaner is much lower than the preset.

Red

• High Pressure— indicates that the pressure applied to the row cleaner is much higher than the preset.

Red

• Error— indicates that an error is detected. Select the Row Cleaner screen area to see the error message.

Red

• Tank Pressure— indicates that the tank pressure is too low to operate the row cleaners.

Red

• Check Mark— indicates a normal state for the up and down pressure applied to the row cleaners, the air compressor tank-pressure, and the sensors.

Check Mark

• Exclamation Point— indicates an error within the row cleaner system. A message appears indicating the source of the error.

Exclamation Point

• Diagnostics & Calibrations— select to view row cleaner diagnostic information.

Diagnostics & Calibrations

• Advanced Settings— access further adjustments and less common settings.

Advanced Settings