Use Operations Center to automatically transfer data between displays and John Deere Operations Center. Data is transferred using cellular signal through the modular telematics gateway (MTG) or a wireless internet connection.
NOTE: Operations Center requires a Basics license and either an active MTG or a wireless USB adapter with internet access.
NOTE: Operations Center requires a Basics activation and either an active MTG, built-in Wi-Fi with internet access (4640 only), or a wireless USB adapter with internet access.
|
Ready - Connected to John Deere Operations Center. |
|
|
Not Ready - Not connected to John Deere Operations Center. |
|
|
Diagnostics - Troubleshoot Operations Center when status is Not Ready. |
|
|
Wireless Export Log - View wirelessly exported files that are manually triggered. |
|
|
Display Registration - Select to register the display to an active John Deere Operations Center account. |
|
NOTE: If connecting to a mobile hotspot, ensure that the hotspot is configured to use IPv4 APN protocol. Registering the display to John Deere Operation Center requires IPv4.
|
Enable Auto-Import of Planned Work - Select to enable Auto-Import functionality. |
|
Auto-Import does not automatically import data while an import, export, or delete process is active.
If Auto-Import is stopped by a power cycle, it resumes automatically after the display reboots.
NOTE: On John Deere Operations Center, enable Data Sync Setup for the organization. It must be enabled on the website before it can be enabled on the display.
|
Select Auto Sync with Operations Center checkbox to send and receive John Deere Operations Center data. |
|
Data is sent to and received from John Deere Operations Center when the MTG has cellular signal or internet access, the built-in Wi-Fi has internet access (4640 only), or the wireless USB adapter has internet access.
|
Select the refresh button to manually force a data synchronization. |
|
Select the status message to view Data Sync Status.
When John Deere Operations Center or a connected display is used to create an active setup data type, the changes are synchronized with John Deere Operations Center and all connected displays within the organization.
NOTE: Configure the Users and Access application to prevent unwanted changes by operators.
When no internet connection is available, changes made locally are stored on the display and are synchronized when the internet connection is restored.
For connected displays, setup files cannot be deleted. Information must be deleted from John Deere Operations Center and synchronized on the display.
|
Select Enable Sync to Operations Center checkbox to send data to John Deere Operations Center every 30 seconds. |
|
Data is sent to John Deere Operations Center when the MTG has cellular signal or internet access, the built-in Wi-Fi has internet access (4640 only), or the wireless USB adapter has internet access. If a connection is not available, work data is stored on the display. Data is sent when the connection is restored.
Work data is uploaded to Field Analyzer and Files in John Deere Operations Center.
|
Select Enable Sync from Operations Center checkbox to receive shared coverage maps and guidance lines from other operators within the same organization. |
|
Even though work data is automatically sent from the display to John Deere Operations Center every 30 seconds, files cannot be viewed in the Operations Center until one of these triggers occurs:
Operator starts new work, or changes client, farm, or field.
Connection is lost between the display and John Deere Operations Center for more than 30 minutes.
Key is turned off and then on within 30 minutes.
Key is turned off for more than 30 minutes.
Wireless transfer status is displayed in the Status Center.
|
Operations Center Active - Automatically Sync Work Data is checked and work data is being sent to John Deere Operations Center. |
|
|
Operations Center Error - John Deere Operations Center connection status is Not Ready. Either Data Sync Setup Data or Data Sync—Work Data is disabled. |
|
|
Wireless Export Active - A wireless export has been initiated, or a previous wireless export has resumed after turning the key on. |
|
|
Received Files - A file has been received from the MTG. |
|
|
Wireless Export Error - A wireless export has failed. |
|
