AutoTrac RowSense Status

Select the toggle to turn the RowSense application ON or OFF.

ON / OFF

RowSense Status Icons

System is on standby.
System is engaged and operating with both row sensor data and GPS.
No GPS signal. System operating with row sensor data only.
No row sensor data. System operating with GPS only.

Guidance track selected - Tracking mode is selected and guidance line is established.
GPS signal adequate - Differential correction signal is available.
RowSense sensor voltages OK - When sensors are not engaged, the left and right sensor voltages are within the correct range.
RowSense sensors detecting crop - Crop is passing through the sensors.
AutoTrac engaged - AutoTrac is engaged.

Select Sensor Settings & Calibration to view settings and to calibrate the sensor.

Select the toggle to turn AutoTrac Vision ON or OFF.

ON / OFF

System is on standby.
System is engaged and operating with both vision sensor data and GPS.
No GPS signal. System operating with vision sensor data only.
No row sensor data. System operating with GPS only.

Guidance track selected - Tracking mode is selected and guidance line is established.
GPS signal adequate - Differential correction signal is available.
AutoTrac Vision sensor calibrated - Sensor is calibrated.
AutoTrac Vision sensor confidence OK - Sensor is able to accurately detect crop.
AutoTrac engaged - AutoTrac is engaged.

Select Sensor Settings & Calibration to view settings and to calibrate the sensor.