Table of Contents

Data Types

Guidance Tracks

Access Manager Settings

Implement Profiles

 Settings Configurations

Machine Profiles

Screenshots

Custom Run Pages

Error Logs

Work Data

Quarantined Data

Boundaries

StarFire Data Capture

Prescriptions

Ethernet Device Files

Setup Data

Variety Locator

ISOBUS Tasks

AutoPath Line Data

Harvest ID

 

Guidance Tracks

Quarantined Data

Setup Data

StarFire Data Capture

Screenshots

Ethernet Device Files

Error Logs

 

License File

Import / Export File Types

Guidance tracks include guidance lines and associated client, farm, and field names.

NOTE: Imported adaptive curve tracks require a minimum of one complete segment.

NOTE: Machine access patterns created using the methods Machine Access A + B, Machine Access A + Heading, or Machine Access Lat/Long + Heading cannot be exported or imported. Only the straight tracks that were created from these methods can be transferred.

NOTE: When exporting data, shared guidance tracks from In-Field Data Sharing are also exported.

Implement profiles can be transferred between displays and imported from John Deere Operations Center. This includes profiles saved to the display for implements without a control unit.

NOTE: Connection type, work recording, operation, and rate control unit are not imported with implement profiles.

Machine profiles are configured using the Equipment Manager application. They can be transferred between universal displays.

NOTE: A universal display automatically generates machine profile settings when a compatible John Deere machine is detected.

NOTE: When imported to a universal display, any machine profiles that contain a machine PIN are not visible in the Equipment Manager application. A machine profile is automatically generated when the display detects a compatible John Deere machine. The automatically generated machine profile overrides any imported profiles containing machine PINs. Imported machine profiles without a machine PIN are still visible in the Equipment Manager application.

Custom run pages can be transferred between displays.

  • G5 Displays can import run pages from all G5 and Generation 4 Displays.

  • Generation 4 Displays can import run pages from Generation 4 Displays that are the same size.

NOTE: Imported run pages are available on the All Run Pages tab in Layout Manager.

NOTE: Some run page modules reset to default settings when imported.

NOTE: Run page modules created for ISOBUS VT implement control units appear as unavailable if the control unit is not connected to the machine.

Work data includes Mapping and totals data. It can be uploaded to John Deere Operations Center or unloaded into compatible desktop software. When importing work data, only mapping data is transferred. Work totals cannot be imported or exported.

NOTE: Exporting work data is not available with a 4100 CommandCenter.

Shared coverage from In-Field Data Sharing cannot be exported from the display. Only work data done locally can be exported. To export coverage from an In-Field Data Sharing event, data must be exported from the display of each contributing team member.

Boundaries are configured using the Fields application.

Prescriptions are configured using the Work Setup application.

NOTE: Prescriptions created in Apex must be exported in the shapefile format.

Setup Data is configured using Work Setup, and it includes client, farm, field, crop varieties, product information, and RTK settings.

NOTE: Setup files containing planned work files are automatically imported when received from John Deere Operations Center.

ISOBUS Tasks are configured using the ISOBUS Tasks application.

NOTE: ISOBUS Tasks file size limit is 10 MB.

NOTE: ISOBUS Tasks cannot be exported or imported using Wireless Data Transfer.

Harvest ID data is configured using the Work Setup application and contains recorded cotton harvest information.

Access Manager Settings are configured using the Users and Access application.

Settings Configurations are configured using the Settings Manager application. Settings configurations can be transferred between displays.

NOTE: Available settings vary by machine, implement, and control unit type.

NOTE: Only profile name, run pages, iTEC sequences, and John Deere pull-type sprayer settings can be transferred between displays.

Export-Only Files

Screenshots can be created by pressing the upper left-hand corner of the screen and holding for 3 seconds.

Error Logs are used by John Deere to troubleshoot issues.

Quarantined Data is a file created when the operator selects to quarantine data after experiencing an unexpected error. Quarantined data is created as an attempt to preserve work data, boundaries, guidance tracks, implement profiles, prescriptions, and setup data.

NOTE: Recovering quarantined data files requires technical assistance. Contact your John Deere dealer to attempt data recovery.

StarFire Data Capture contains logged data from the StarFire Receiver used by John Deere to troubleshoot issues.

NOTE: StarFire Data Capture is available on StarFire 6000, 7000, and 7500 Receivers.

To enable StarFire Data Capture, select the Capture Data option within the receiver VT page.

Ethernet Device Files are collected from John Deere devices that support File Transfer Protocol and have an Ethernet connection to the display. They are used by John Deere to troubleshoot issues.

When exporting Ethernet device files, select the appropriate log size:

Import-Only Files

Variety Locator is configured using John Deere Operations Center.

Only one AutoPath Line Data file can be imported per field. If a second file is imported, the older file is overwritten.

License Files enable features on the display. View the status of the license in Software Manager.