Table of Contents
Table of Contents
SF1 - Activated on every StarFire 3000 and newer receiver.
StarFire 3000 Receivers
SF2 Ready - Receiver must be SF2 Ready to activate SF2 license and RTK.
RTK Ready - Enables radio RTK. Receiver must have an RTK activation to activate M-RTK license.
StarFire 6000 Receivers
SF3 Ready - Receiver must be SF3 Ready to activate SF3 license.
RTK Ready - Enables radio RTK. Receiver must be RTK Ready to activate M-RTK license.
StarFire 3000 Receivers
SF2 License - Displays license status of StarFire signal.
Yes-Enabled - A valid license exists, and it is the differential correction mode selected.
Yes-Disabled - A valid license exists, but it is not the differential correction mode selected.
No - No valid license exists or license has expired.
SF2 End Date - Displays date when license expires.
StarFire 6000 Receivers
SF3 License - Displays license status of StarFire signal.
Yes-Enabled - A valid license exists, and it is the differential correction mode selected.
Yes-Disabled - A valid license exists, but it is not the differential correction mode selected.
No - No valid license exists or license has expired.
SF3 End Date - Displays date when license expires.
StarFire 7000 and 7500 Receivers
SF-RTK - renewable license.
Active - A valid SF-RTK license exists.
Expired - No valid SF-RTK license exists, or a subscription has expired.
RTK - permanent license.
M-RTK License - Displays license status of M-RTK signal.
Yes-Enabled - A valid license exists, and it is the differential correction mode selected.
Yes-Disabled - A valid license exists, but it is not the differential correction mode selected.
No - No valid license exists or license has expired.
M-RTK End Date - Displays date when license expires.
StarFire serial number.
NOTE: Activation codes are required for SF2 Ready, SF3 Ready, SF2, SF3, SF-RTK, and all RTK activations and licenses.
|
Select Enter button to input 24-digit codes for all activations and licenses, and deactivation codes for transferring all StarFire activations and licenses. |
Enter |
Select Enter button, and the Activation Code box appears with three input boxes.
NOTE: If more than 8 digits are entered into an input box, “99999999” appears. Reselect box and type only 8 digits into input box.
Select first input box labeled Digits 1-8. Enter first 8 digits of 24-digit code.
Select second input box labeled Digits 9-16. Enter second 8 digits of 24-digit code.
Select third input box labeled Digits 17-24. Enter last 8 digits of 24 digit code.
Select Enter button.
A confirmation message appears when 24-digit code is valid and entered correctly.
|
Use 1 |
