Quick Links

Setup | Ride Quality Low

Ride Quality Low is the percentage of good ride quality that you want the row units to remain above. A vibration sensor is used to determine ride quality. Perfect ride quality is 100% (no vibration).

NOTE: There is always vibration during operation. Perform field checks to determine if the ride quality affects seed depth at your current settings. Adjust the downforce margin or ground speed as necessary.

Modify When:

The ride quality percentage is lower than the alarm limit, but the seed placement is within your expectations.
The ride quality percentage is lower than you want and no alarm is given.

Procedure to Modify:

Select the input box and enter the percentage to remain above into the number pad.

Input Box

Select OK to save your selection or select Cancel to close the page without saving.

Cancel

Default: 50%

Quick Links //<![CDATA[ importTOC("../00_welcome/files/seedstar.toc") //]]>

Setup | Ride Quality Low

Modify When:

Procedure to Modify:

Quick Links