Quick Links

Section Status

Section Status allows you to view the status of your meter sections and to turn them ON and OFF.

Items Accessible on Section Status:

Section Status— consists of two selectable areas. Select the top area, containing the status indicators, to access the Section Control application.

NOTE: If a GPS signal is marginal, group the outer rows together for the best performance. See Section Control in the Equipment Manager application.

Section Status

Select the buttons in the bottom area to manually command sections ON and OFF.

Right Arrow— select to command sections OFF, starting from the left-hand section.

Right Arrow

Left Arrow— select to command sections OFF, starting from the right-hand section.

Right Arrow

NOTE: Additional left and right arrows appear on the far right or left when a section is manually shut OFF. Select these arrow buttons to turn the sections back ON.

Enable All— select to command all sections ON.

Enable All

NOTE: The Enable All button is disabled when all sections are ON.

Enable All

Section Control ON— indicates that the Section Control application is in command of the sections.

Section Control On

Section Control OFF— indicates that the Section Control application is disabled.

Section Control Off

Manual Control— indicates that the Section Control application is not available or is not activated.

Manual Control

Section Statuses:

Active— the green sections indicate that the meters in the section are delivering seed.

Active

Off (Manual)— the black sections indicate that you manually commanded the section OFF.

Off (Manual)

Off (Auto)— the green and white sections indicate that the Section Control commanded the section OFF.

Off (Auto)

Enabled— the blank sections indicate that the meters in the section are enabled, but not delivering seed.

Active

Disabled— the gray sections indicate that the meters in the section are disabled.

Disabled