Quick LinksQuick LinksGauge Wheels displays the downforce margin and ground contact readings from the row unit sensors. Downforce control is accessible from this page.
Downforce Margin— displays the active downforce target margin. Select to adjust the margin settings. |
Downforce Margin |
NOTE: Margin values are for reference (not adjustable) while in set-point mode.
Over the Graph— the row number (R_) and downforce margin are shown for the row with the highest value and the row with the lowest value.
Bar Graph— displays the downforce margin for every row unit. Each bar represents the margin over (+) or under (-) the target. Select an area of the downforce margin graph to zoom to that area. The rows in the selected area expand into the upper screen area. The selected area is outlined with a yellow box that is moveable with the adjustment dial.
Downforce Graph
Population Graph with Selected Area |
Adjustment Dial |
NOTE: Select the tab to exit the zoom area at any time. Select a single row to zoom to a row-details page.
Downforce— displays the applied downforce. Select to adjust the downforce settings. |
Downforce |
Select the Downforce/Ground Contact toggle to switch between each. The graph for the option selected appears next to the toggle.
Downforce— displays the average force applied. |
Downforce Selected |
Ground Contact— displays the average (Avg) percentage of contact for all the rows and the row number (R_) with the lowest ground contact. |
Ground Contact Selected |
Bar Graph— displays a graph for the toggled selection. Each bar represents the percentage of contact over the target or the downforce applied. Select an area of the graph to zoom to that area. The rows in the selected area expand into the upper screen area. The selected area is outlined with a yellow box that is moveable with the adjustment dial.
NOTE: Select the tab to exit the zoom area at any time. Select a single row to zoom to a row-details page.
