Quick Links

Dimensions | Lateral Offset

IMPORTANT: If your planter is a split-row model and the hitch is offset when planting split rows, do not adjust the lateral offset value in the software. The offset value remains zero because the planter rows are recentered when the hitch is moved.

NOTE: The split rows are typically further from the tractor than standard rows. Adjust the Work Point when switching between narrow and wide row spacing.

Lateral Offset allows you to select the direction of offset and the distance of the offset.

Procedure to Modify:

  1. Adjust the hitch to match the correct implement orientation. (For more information, see your implement Operator's Manual.)

  1. Select the radio button that matches the orientation of your implement.

Radio Button

Left Offset

Center Offset

  1. For a left or right offset, measure the offset as follows:

  • Drawbar Hitch— Measure from the tractor centerline to the drawbar pin.

Drawbar Hitch

2-Point Hitch

  1. Enter the value using the number pad and then select OK to save your entry or Cancel to close the page without saving.

OK

Cancel