Quick LinksQuick LinksDiagnostics | Row Unit Controller (RUC) Row Addressing allows you to view the details about the row unit controllers.
Left Side— displays the row units on the left-hand side of the implement.
Right Side— displays the row units on the right-hand side of the implement.
Row— is the row unit identifier.
Control Unit— shows the control unit identifier.
CAN Bus Address— shows the address of the control unit on the CAN bus.
Serial Number— shows the serial number of the control unit.
Address— is the current state of the controller on the CAN bus.
OK— indicates that all power and communication is normal. |
OK |
Error— indicates that there is a fault in the wiring. |
Error |
Verify that the Row Unit Control Unit terminals are clean, all circuits fully connect, and each circuit has the correct voltage.
Inspect the power and ground wires at the control unit.
Inspect the voltage on CAN Hi and CAN Lo.
Inspect the address wire connections.
