Diagnostics | Gauge Wheel Downforce

Diagnostics | Gauge Wheel Downforce allows you to view the readings from the gauge wheel sensors on the row units.

Diagnostics

Sensor— is the sensor identifier.

Row Number— indicates the row unit location of a sensor.

Supply Voltage— is the power currently provided to the sensor from the tractor.

Maximum— 5.5 V

Input Voltage— is the voltage reading in response to force detected.

Maximum— 4.9 V

Minimum— 0.5 V

Applied Load— shows the force applied to the row unit for proper soil penetration and gauge wheel contact with the soil.

Enabled— select to enable a row manually.

Enabled

NOTE: If a row is set for zero population, it shows as disabled.

Enabled— deselect to disable a row manually. You can disable the sensors on a row if the sensor fails (until you make the repairs).

Disabled