Quick Links

Diagnostics | EPG

Diagnostics | Electric Power Generation (EPG) displays the status of the power generation system and its components.

Items Accessible on Diagnostics | EPG Page:

EPG Screens— use the left and right buttons to scroll through the EPG screens.

Left Arrow

Right Arrow

Overview Screen— shows the status of the EPG components.

Overview Screen

EPG Hardware/Software Screen— shows the specific identification numbers for the hardware and software on your implement.

EPG Hardware/Software

System Voltages Screen— shows the measurable voltages of the EPG components.

System Voltages Screen

Sensors Screen— shows values associated with the EPG sensors.

Sensors Screen

Items Accessible on Overview Screen:

Gauges— visually display the range and current level of two important aspects of the EPG system.

Gauge

Gauge Indicator— moves along the gauge to show the current reading.

Gauge Indicator

Speed Gauge— displays the rpm of the hydraulic motor powering the EPG alternator.

Pressure Gauge— displays the hydraulic pressure for the EPG motor.

NOTE: The Speed and Pressure gauges appear with the Implement Power Generation system. The green area is the preferred level when the hydraulics are at the optimum level.

Main Bus Voltage Gauge— displays the voltage output from the EPG alternator.

NOTE: The Main Bus Voltage gauge appears with the Tractor Power Generation system. The green area is the preferred level when the alternator is operating at the optimum level.

Gearbox Temperature Gauge— displays the temperature of the EPG alternator gearbox.

NOTE: The Gearbox Temperature appears with the Tractor Power Generation system. If the indicator enters the red area, stop and inspect the gearbox. (See lubrication recommendations in the implement Operator's Manual.)

Status

Status Indicators— show you the status of the EPG requirements needed for engagement.

Active— indicates that the requirement is met.

Green

Inactive— indicates that the requirement is not met.

Gray

Error— indicates that you attempted to enable the power generation before the requirements were met.

Red

Toggle ON/OFF— select to enable or disable the power when the power generation system is engaged.

ON/OFF

Clear Fault— select after a fault occurs to clear the fault before attempting to enable the power generation again.

Clear Fault

Readings

Gauges— visually display the range and current level of voltage or amperage of various components.

Gauge

Procedure to Modify:

IMPORTANT: If a service diagnostic trouble code (DTC) message appears, follow the instructions and select OK to continue to the EPG diagnostics page and clear the fault after the issue is resolved.

Select the toggle button to enable or disable the power generation when the EPG system is engaged.