Table
of ContentsTable
of ContentsInformation and Settings allows the operator to access further adjustments and less common settings.
Continuous Tillage - Toggle continuous tillage on and off. |
ON / OFF |
Use continuous tillage to keep the tillage tool in the ground when going over previous coverage. This is used to not leave tire tracks over previous coverage. This feature is only available when using a tillage implement capable of Section Control.
NOTE: This feature does not work when used in conjunction with a product application operation.
Map Diagnostics - Toggle map diagnostics on and off. |
ON / OFF |
Map diagnostics displays the Section Control look-ahead function. The look ahead turns white when sections are commanded off and orange when sections are commanded on. |
|
For best accuracy, maintain a constant speed and direction when entering and exiting the transition area where Section Control turns sections on or off. Changing speed or direction between when the look ahead crosses the transition area and when the work point crosses the transition area may cause undesired gaps or overlaps in coverage. Use map diagnostics to verify that the look-ahead window is stable when the machine is driving at a constant speed and direction.
NOTE: At slow speeds and with very low mechanical delay times, the look ahead may be very close to or overlap with the green work point bar.
