Table of Contents

All Sequences

A sequence is a series of steps or actions that you want the tractor to complete. Steps are completed in the order in which they were added.

Modify when you want to:

Procedure to add new sequence:

1. Select New Sequence button.

2. Select Add Step button.

3. Select an available function from the list.

4. For that function, select an available action from the list.

5. Enter the step distance.

 NOTE: This is the distance the machine travels after iTEC is engaged.

6. Repeat 2-4 to add more steps to the sequence.

NOTE: Each new step is added to the sequence after the highlighted step in the list. The step distance for the new step is automatically the same as the highlighted step.

7. If needed, edit the step distances for the sequence.

NOTE: The steps are automatically reordered with the shortest distance first.

NOTE: If using AutoTrac Turn Automation, negative step distances can be entered.

8. After the sequence is setup, select Next button.

Next

9. Enter Name and Assignment.

10. Select Save button.

Save

NOTE: Closing any of the selection lists cancels the sequence setup process.

Procedure to edit sequence:

1. Select sequence to edit.

2. Select Edit button or

select Trash button to delete sequence.

3. Edit desired steps.

4. Select Next button.

Next

5. If needed, enter Name and Assignment.

6. Select Save button.

Save

NOTE: Closing any of the selection lists cancels the sequence edit process.