Select Hide Diagnostic Center to minimize application and return to main page.
IMPORTANT: Changing settings in Diagnostic Addresses may damage machine or implement controllers. Follow instructions, and use caution when changing address values.
Controllers have addresses that store values for different settings. Each Address is identified by an Address Number and Type. Data addresses can only be viewed (for example, software version information) while Input addresses can be edited (for example, calibration settings).
Scroll through the list to find correct address. If information from an address is needed, the value is displayed in right hand column. Otherwise, select address to display address details popup.
If it is possible to edit an address, select button on the popup page and enter new value.
Display is set to Diagnostic Mode once a controller is selected.
|
Select Hide Diagnostic Center to minimize application and return to main page. |
|
Hide button is useful for accessing another part of display during a calibration procedure.
To return to the same diagnostic page, select Diagnostic Center application from menu.
NOTE: Leaving display in Diagnostic Mode is not recommended, because it can negatively affect performance.
Remove Diagnostic Mode by closing controller page.