-
Select Start button to begin calibration.
Start
-
Follow messages to complete procedure.
-
Confirm calibration by selecting Save button and to return to Diagnostics Center Readings.
Save
CAUTION: During calibration, machine moves slowly to the left or right. It may move unpredictably.
This procedure calibrates the AutoTrac Controller hydraulic valve to maximize guidance performance.
Beginning a new season.
There is lateral guidance error on display.
Machine is weaving back and forth along the guidance line.
Drive machine until the hydraulic oil is at operating temperature.
Perform the calibration on a level, dry surface.
Place machine in lowest gear at the maximum rpm.
|
Start |
|
|
|
Save |
|
|
|
Retry |
|
|
|
Select Cancel button to return to Diagnostics Center Readings. |
Cancel |
