Select Sort button to sort readings by:
IMPORTANT: Changing settings in Readings may damage machine or implement control units. Follow instructions and use caution when changing address values.
Control units have readings that store values for different settings. Each reading is identified by a number and name.
|
Select Sort button to sort readings by: |
|
Number
Name
Ascending
Descending
Select a reading to display the reading details popup. If the value can be edited, the value field is white. If the value is read-only, the value field is grayed out.
Display is set to Diagnostic Mode once a control unit is selected.
|
Select Hide Diagnostic Center to minimize application and return to main page. |
|
Hide button is useful for accessing another part of display during a calibration procedure.
To return to the same diagnostic page, select Diagnostic Center application from menu.
NOTE: Leaving display in Diagnostic Mode is not recommended, because it can negatively affect performance.
Remove Diagnostic Mode by closing Controller Diagnostics page.
