Select Hide Diagnostic Center to minimize application and return to main page.
Control units have calibrations that aid in troubleshooting an issue, servicing the machine, or providing relevant machine data.
Use a Calibration to:
Calibrate a part or system.
Enable or disable a system.
Run a pre-defined routine.
Select a calibration to view the Calibration Details.
Display is set to Diagnostic Mode once a control unit is selected.
|
Select Hide Diagnostic Center to minimize application and return to main page. |
|
Hide button is useful for accessing another part of display during a calibration procedure.
To return to the same diagnostic page, select Diagnostic Center application from menu.
NOTE: Leaving display in Diagnostic Mode is not recommended, because it can negatively affect performance.
Remove Diagnostic Mode by closing Controller Diagnostics page.